Follow these easy steps to get your AEG FAVORIT 65040 I NL Dishwasher up and running in no time.
Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible if an incorrect installation and use causes injuries and damages.
Remove all the packaging and ensure the appliance is not damaged. Do not install or use a damaged appliance.
Connect the water inlet hose to a water tap with a 3/4'' thread. Ensure not to cause damage to the water hoses. Before connecting the appliance to new pipes or pipes not used for a long time, let the water flow until it is clean. Make sure there is no leakage.
Load the baskets with your dishes. Put small items in the cutlery basket and light items in the upper basket, ensuring they do not move. Make sure the spray arms can move freely before starting a programme.
Adjust the water softener according to the water hardness in your area. Refer to the water hardness table provided in the manual for proper adjustment settings.
Turn the cap counterclockwise and open the salt container. Put 1 litre of water in the salt container (only for the first time).
Adjust the released quantity of rinse aid. Fill the rinse aid dispenser.
Put the detergent in the compartment. If the programme has a prewash phase, put a small quantity of detergent on the inner part of the appliance door. If using detergent tablets, place the tablet in the compartment.
Open the water tap, press the on/off button to activate the appliance, and close the appliance door. Make sure the appliance is in setting mode. Press the Program button until the indicator of the desired programme comes on.